Strategi Pengelolaan Sampah Berbasis Teknologi Tepat Guna: Kombinasi CF Drum Incinerator untuk Sampah Residu dan Pemanfaatan Sampah Plastik menjadi Ecopaving di Kelurahan Terumbu, Kecamatan Kasemen, Kota Serang

Romadoni Romadoni; Farhan  Firdaus; Sandy Fitriansyah  Rukandi; Ahmad Jajang  Jajuli; Afriyah Afriyah; Muhamad Fajar  Anugrah

doi:10.46306/seumpama.v3i2.101

Authors

Romadoni Romadoni Universitas Bina Bangsa
Farhan Firdaus Universitas Bina Bangsa
Sandy Fitriansyah Rukandi Universitas Bina Bangsa
Ahmad Jajang Jajuli Universitas Bina Bangsa
Afriyah Afriyah Universitas Bina Bangsa
Muhamad Fajar Anugrah Universitas Bina Bangsa

DOI:

https://doi.org/10.46306/seumpama.v3i2.101

Keywords:

Waste Management; Appropriate Technology; Ecopaving; CF Drum Incinerator; Kelurahan Terumbu

Abstract

The waste problem in Kelurahan Terumbu continues to escalate, particularly plastic and residual waste that is difficult to decompose. This activity aims to implement appropriate technology (AT) in waste management by producing plastic-based ecopaving blocks and applying a CF Drum Incinerator for residual waste treatment. The methodology includes socialization, equipment fabrication, user training, and field trials. The compressive strength test results of the ecopaving blocks showed an average value of 9.8 MPa, exceeding the Indonesian National Standard (SNI) minimum requirement for pedestrian areas. The CF Drum Incinerator successfully reduced residual waste volume by up to 65% and decreased smoke intensity compared to open burning. Community feedback indicated an 87% positive acceptance rate, although technical challenges remained, such as the need for additional fuel for the incinerator. In conclusion, the combination of these two ATs effectively reduces waste generation, increases environmental awareness, and has potential for replication in other regions.

Downloads

Download data is not yet available.

References

Siahaan, S. V., Widya, P. R., Yuliana, Y., & Siolemba, P. (2023). Pendampingan pengolahan dan branding produk paving block dari sampah plastik. Jurnal Pengabdian Dharma Laksana, 6(1).

https://doi.org/10.32493/j.pdl.v6i1.32187

Medikano, A., Haq, A., Anita, A., Setyawati, D. M., Bahar, E., Herdianto, H., … & Zulkarnain, Y. (2023). Pendampingan produksi eco paving block dari limbah plastik di lingkungan RT 003 RW 010 Puri Bukit Depok Sasakpanjang Kabupaten Bogor. Jurnal Pengabdian Masyarakat Bangsa, 2(10).

https://doi.org/10.59837/jpmba.v2i10.1823

Prasetya, F. (2024). Sosialisasi dan pelatihan pembuatan paving block berbahan dasar sampah plastik di Desa Batuputih Daya. ABDISUCI: Jurnal Pengabdian dan Pemberdayaan Masyarakat, 2(1), 8–14.

https://doi.org/10.59005/j-abdisuci.v2i01.149

B. Latipah, N., & Khosi’in. (2023). Uji kuat (kuat tekan) paving block hasil konversi sampah plastik. BIOEDUSAINS: Jurnal Pendidikan Biologi dan Sains, 6(2), 551–558.

https://doi.org/10.31539/bioedusains.v6i2.5930

Wulandari, P., Pamularsi, S. A., Artanti, A. N., Zathira, A. T., Oktaviani, S. A., Ramadhani, D.,

… & Purwanto, E. (2024). Inovasi pemanfaatan limbah plastik menjadi paving block di Desa Pungangan Kecamatan Mojotengah Kabupaten Wonosobo. JPEMAS: Jurnal Pengabdian Kepada Masyarakat, 2(2), 172–177.

https://yptb.org/index.php/abdicurio/article/view/779

Benu, D., Wiguna, I. G. A., Christanti, C. C., Yati, R. E., Gelyaman, G. D., & Batu, M. S. (2023). Pelatihan konversi sampah plastik menjadi paving block di Perumahan Biinmaffo. Jurnal Pengabdian kepada Masyarakat Nusantara, 6(1).

https://doi.org/10.55338/jpkmn.v6i1.5217

Mustakim, M., Rahima, R., Muis, A., & Sulfanita, A. (2023). Studi perbandingan kuat tekan paving block berbahan dasar limbah plastik. Jurnal Ilmiah Rekayasa Sipil, 20(1), 41–50.

https://doi.org/10.30630/jirs.v20i1.1022

Khosiin, K., & Latpah, N. (2023). Uji kuat (kuat tekan) paving block hasil konversi sampah plastik. BIOEDUSAINS: Jurnal Pendidikan Biologi dan Sains, 6(2).

https://doi.org/10.31539/bioedusains.v6i2.5930

Kapita, H., Aswan, M., & Cahyani Aswan, D. T. (2022). Pengujian kuat tekan beton pada paving block berbahan baku limbah plastik. Jurnal Serambi Engineering, 8(2).

https://doi.org/10.32672/jse.v8i2.5966

Syamsiro, M., et al. (2023). Penerapan teknologi insinerator ramah lingkungan untuk pemusnahan sampah di TPS3R Bisma, Sleman. J-ABDI.

https://mail.bajangjournal.com/index.php/J-ABDI/article/view/8985

Permata Dewi, A., Karimah, H. S., & Rahmawati, L. A. (2024). Optimalisasi pengelolaan sampah di RW 16 Desa Cigugurgirang: keunggulan dan keterbatasan mini incinerator sebagai inovasi untuk mendukung SDGs. Dalam Prosiding Seminar Nasional, Universitas Islam Negeri Sunan Gunung Djati Bandung.

https://proceedings.uinsgd.ac.id/index.php/proceedings/article/view/5504

Kementerian Lingkungan Hidup dan Kehutanan. (2021). Sistem informasi persampahan nasional (SIPSN) – Statistik persampahan nasional Indonesia.

https://sipsn.menlhk.go.id/sipsn